swimming pool fence, gate

Installation of the a fence

CAREFULL To achieve a right angle : You cannot make a right angle with one post. The angles are made with two posts – the end of one section and the beginning of another : so 2 posts in every right angle .

QUOTATION REQUEST

To finalise your quotation there are certain simple things we need to know in order to facilitate your installation, to be sure that your layout will be true to your wishes and that your fence will last a long time.

PLEASE TELL US

  1. The length of each of the interior sides of the pool including the distance from the pool which you would wish to set up the fence. In the absence of instructions from you we would place the fence at more or less than 1 m from your pool.

  2. Or the length of each of the sides of the planned fence: take a measurement between each angle assuming that the sections will be delivered in metre lengths1, 2, 3, 4, 5, … up to 12m. It is however, possible to cut the net in order to adjust the fence to the length required. e.g. for 5.80m fence take 6m and cut 20cms. (to cut see installation manual)

  3. The type of surface on which each of the sides will be installed: concrete paving, paving on sand, earth, wood …

  4. where you would like to have openings in the lengths.

  5. If you want a manual opening: a security catch ( hook) which joins the sections (don’t plan openings at the angles)

  6. Or you want an automatic self closing gate and in this case where you want it.

  7. Make sure there is good tension at the right angles, it is not possible to install a gate at the angle. In this case plan a section of 1m then the automatic gate on a straight line.

  8. In the case of a fence which does not surround the pool: partial perimeter, please inform us if there is a wall at each end to fix the last post of the section to the wall with a catch. Please provide details of the height of this wall. If there is no wall we suggest supporting posts to be placed at the ends of the fence.

  9. You can attach a little plan or drawing

  10. The colour of net and posts required

  11. The floor drilling diameter 16 or 30mm.

On receipt of these details we will send you:

A suggested plan and a quotation including: the necessary sections, the appropriate number of parts according to your ground and the delivery cost